What is the notice to the ionic cleanse
a. The secure voltage, 0~24V of the device is switched from the low voltage, but the operating panel and control box should be away from water.
b. Based on the different water quality and using time, the ionic cleanse heads can be used for about 50 times. It is consume products. After 300--40 times, it needs to be changed. You can buy it in our company.
c. For the new user, we suggest to use it once a day, about 30 minutes for every time. Then use once a week after 15 times.
d. After using, pour the water out carefully. Don’t let the water into the upper operating panel.
e. Clean the electrode array after using. Then dip it in the glass with 200ml cleansing liquid for 5 – 20 minute. Wash it after dipping. One glass of cleansing liquid only can be used for 5 times.
f. Finally, dry the ion heads with electrical dryer. Put it back to the metal box.
g. Please take good care of the cleansing liquid out of the child’s reach. No eating.
How to use?
a. Prepare a regular foot bath basin. Pour into the warm water, 37-40 degree.
b. Add some salt (Refined salt or coarse salt is better).
c. Put the feet in the basin.
d. Put the ion heads in the basin and turn on the device and adjust the time about 30 minutes
The whole detoxification process is safe, fast, effective, visible and tested
How long the set of ionic cleanse can be used
The ionic cleanse belongs to the consume product. Normally, it can be used for 30---40 times (if the water hardness is appropriate and a little salt.), but when it’s always Zero on V and A place of the display, that means the array need to be changed. The too hard water, too more salt, long-time dipping will shorten the life of the array .The ionic cleanse will be consumed constantly during using. And the impurity on it will become more and more. Its function will be weakened. It’s necessary to change the array to keep the good function. To prolong the usage life and keep the sanitation (avoid of the interactive inflection). Sterilize, clean and dry the device after using every time. For the good effects, please change our special ion cleanse. If you use other brand, it’s easy to broken the mini-computer electrode plate and damage the machine.
What is the notice to clean the ionic cleanse
a. Use the special cleansing liquid of ionic cleanse.
b. The cleansing liquid dips the whole ionic cleanse.
c. According to the using time of the ionic cleanse, choose the dipping time, usually, 5-20 minutes. Short dipping and cleaning time for the new device, but it needs to dip a longer time if use very often. The principle is to clean the heads material to new degree, but can’t be dipped too long, or it will impact its usage life.
d. Wash it under the tap water after dipping.
e. Finally, dry the ion heads with electrical dryer and put them back to the metal box.
f. The cleansing liquid has causticity. Put it in a safe place out of the child’s reach.
g. The cleansing can be used for 4-6 times repeatedly. Cover the glass after dipping.
How to choose the timing and strength when detoxification?
At the first foot bath, adjust the time as 20 minutes, the strength level 3. If feel tired after the first foot bath, next time, adjust the strength to level 1, the timing still 20 minutes. If no abnormal reaction, adjust to 30 minutes. Then add 1 level every 20-30 minutes, generally, only add to 3 level.
Common troubles
If over 3Amp, it shows the panel wrong with alarm coming. It means high output and then the power off automatically.
If both the current and the voltage are very low, the main machine without good radiation and the panel heavy loaded.
If the power is on, but no information after 30 seconds, for example of the voltage, ampere which will be usually displayed every three seconds. Please refer to the reasons as following:

1. The electrode array not in water;
2. The electric conduct of the water is not enough, like the distilled water, suggestion is to add a little salts and mix round to enhance it. When the plate in water, the normal current is between 1.8 and 2.5 ampere, the voltage is between 12 and 18V.
3. The wire of the electrode array is not connected with the main machine.
4. There are damag